www.meridianimplement.com | For Sale 2018 H & S HSM9
2018 H & S HSM9 at www.meridianimplement.com2018 H & S HSM9 at www.meridianimplement.com
2018 H & S HSM9 at www.meridianimplement.com2018 H & S HSM9 at www.meridianimplement.com
2018 H & S HSM9 at www.meridianimplement.com2018 H & S HSM9 at www.meridianimplement.com
2018 H & S HSM9 at www.meridianimplement.com2018 H & S HSM9 at www.meridianimplement.com
2018 H & S HSM9 at www.meridianimplement.com2018 H & S HSM9 at www.meridianimplement.com
2018 H & S HSM9 at www.meridianimplement.com2018 H & S HSM9 at www.meridianimplement.com
2018 H & S HSM9 at www.meridianimplement.com2018 H & S HSM9 at www.meridianimplement.com
2018 H & S HSM9 at www.meridianimplement.com2018 H & S HSM9 at www.meridianimplement.com
2018 H & S HSM9 at www.meridianimplement.com2018 H & S HSM9 at www.meridianimplement.com
All
Photos
Videos

For Sale Price:Call

Description

HYDRA-SWING MERGERS

H&S Hydra-Swing Mergers distribute material smoothly and evenly without bunching. Save time and money by combining 2 or 3 windrows from 9′ to 18′ cuts.

With the Hydra-Swing style tongue, the merger can be pulled directly behind the tractor or swung out to the right to fit your operation. Hydraulically folding the optional 2′, 4′, or 6′ extension out of the way, and turning the hydraulic valve to the off position, the Hydra-Swing Merger’s unique design can also be used for merging small mower conditioner windrow applications.

A tractor mounted electric control box directs hydraulic oil flow to swing the tongue or raise and lower the pickup on the Hydra-Swing Mergers.

An optional self-contained hydraulic drive kit with P.T.O. pump is available. This feature allows tractors with a minimum 5 G.P.M. hydraulic capacity and 1 remote to operate the merger.

A heavy duty 42″ wide, ribbed cross conveyor easily accommodates the massive flow of material. A cross conveyor shut-off is optional on all Hydra-Swing Mergers.

Replaceable three prong plastic teeth handle the crop gently and the high rear panel prevents spillage over the back.

The gauge wheels and crop roller are easily set to crop conditions just by removing and replacing the pins in the desired setting.

The pick-up head crop roller is adjustable for height and tension.

Both models feature independent head flotation and a 42″ cross conveyor belt for hi-capacity.

The cross conveyor speeds up when the pickup speed is increased.

The right hand side merges, and with the optional inverter shield, the left hand side inverts.

Transport lights are standard equipment.

Specifications

BASE UNIT WIDTH
14 FT 4 INCH
BASE UNIT WIDTH w/2' OPTIONAL EXTENSION EXTENDED
16 FT 4 INCH
BASE UNIT WIDTH w/4' OPTIONAL EXTENSION EXTENDED
18 FT 4 INCH
BASE UNIT WIDTH w/6' OPTIONAL EXTENSION EXTENDED
20 FT 4 INCH
BASE UNIT WIDTH w/OPTIONAL EXTENSION FOLDED
14 FT 10 INCH
BASE UNIT HEIGHT
5 FT 3 INCH
BASE UNIT LENGTH - POLE SWUNG IN
22 FT
BASE UNIT LENGTH - POLE SWUNG OUT
21 FT
BASE UNIT WIDTH w/ACCELERATOR ROLLER
15 FT 9 INCH
BASE UNIT WIDTH w/OPTIONAL 2' CONVEYOR EXTENSION
16 FT 4 INCH
BASE UNIT WEIGHT
3095 LBS.
BASE UNIT WEIGHT - SELF CONTAINED UNIT
3515 LBS.
TIRE SIZE (FRAME)
(1)6.70 X 15 & (2)9.5L X 15
TIRE SIZE (PICKUP)
5.70 X 8
PICKUP WIDTH
9 FT
REPLACEABLE THREE PRONG PLASTIC TEETH
YES
CROSS CONVEYOR WIDTH
42 INCH
TRACTOR SIZE AND HYDRAULIC CAPACITY REQUIRED STANDARD UNIT
MIN. - 70 H.P. w/16 G.P.M./2000 P.S.I.
TRACTOR SIZE AND HYDRAULIC CAPACITY REQUIRED WITH SELF CONTAINED UNIT
MIN. - 70 H.P. w/5 G.P.M./2000 P.S.I.
HYDRAULIC REMOTES NEEDED - STANDARD UNIT
2
HYDRAULIC REMOTES NEEDED - SELF CONTAINED UNIT
1

General Comments

WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Site Hosted by TractorHouse
Copyright Sandhills Publishing

Meridian Implement

1011 S Meridian Rd
Rockford, IL 61102
(815) 965-0636